RV electrical • San Diego & Orange County
RV Electrical Repair & Upgrades
Class A, B and C motorhomes, fifth wheels, camper vans, overland rigs, skoolies, ambulance conversions and more — RV solar, lithium batteries, Victron systems, inverters, shore power and full custom electrical, done right the first time.
What we do
RV electrical services across San Diego and Orange County
Whether your RV needs a repair, a power upgrade or a complete off-grid system, we design and install electrical work that's clean, safe and built to travel.
- Solar panel systems for RVs and vans
- Lithium battery bank upgrades
- Victron system repair, upgrades and new installs
- Inverter and charger systems
- Shore power, 30A/50A service and transfer switches
- 12V/24V DC systems, lighting and outlets
- Generator integration and auto-start
- Electrical troubleshooting and repairs
- Battery monitoring and remote system monitoring
- Air conditioning on battery power
- Full custom electrical builds for conversions
Rigs we work on
Every kind of rig — from campers to full conversions
If it has a battery, an inverter or a shore-power cord, we work on it.
Fifth Wheels
50A service, slide-out circuits, residential refrigerators, solar and lithium upgrades that let you boondock in comfort.
Van Conversions
Camper van electrical repair and complete power systems — batteries, charging, inverter, monitoring — designed around how you actually travel.
Skoolie Conversions
From partial electrical rough-in to full off-grid systems with solar, lithium storage and shore-power hookups.
- Class A motorhomes
- Class B camper vans
- Class C motorhomes
- Travel trailers
- Fifth wheels
- Truck campers
- Toy haulers
- Overland & expedition vehicles
- Skoolies
- Ambulance conversions
- Van conversions
- Horse trailers with living quarters
- Teardrop & small campers
- Anything with wheels and a power system
Custom build work
Custom builds — from bare shell to finished rig
A look inside our custom build work: van conversions and skoolie conversions taken from an empty shell to a finished, wired and tested home on wheels.
Bare shell — insulated & wired
Spray foam insulation and clean wiring runs laid out before any paneling goes up.
Rough-in on a skoolie
Every circuit planned and marked on the floor before the walls close up.
Van insulation & strapping
Foam insulation and strapping ready for wiring, paneling and finishes.
Roof fan rough-in
Ventilation framed and wired before the ceiling panels go in.
Wiring a van conversion
Cedar ceiling in and every wire pulled to its switch, light and outlet.
Framing & tank placement
Battery box, water tanks and wall framing all laid out before the build closes up.
Ceiling & outlet rough-in
Recessed lights and outlets positioned exactly where they'll be needed.
Paneling a skoolie
Walls sheeted with outlets and switches already roughed in behind them.
Skoolie conversion
Dark wood ceilings, a full kitchen and a sleeping area inside a converted school bus.
Camper van conversion
White shiplap interior, custom cabinets and a full off-grid power setup.
Skoolie with wood stove
Wood ceiling, wood stove and a full kitchen with sink and island.
From bare shell
Insulation and framing done right — the hidden work behind every clean finish.
Finished skoolie interior
Kitchen, seating and sleeping space wired, lit and ready to travel.
Van conversion galley
Full galley kitchen with tiled backsplash and wood ceiling.
Custom interior details
One-off interior panels and finishes tailored to each build.
Custom walnut & resin work
Hand-built walnut drawers with a resin river top — furniture-grade finish in a van.
Skoolie under construction
Bed platform and kitchen roughed in before the final finishes go on.
Planning something bigger? Full custom builds — van conversions, skoolie conversions, overland and expedition vehicles, ambulance conversions, custom metal fabrication, RV design and roof raises — are discussed on a project-by-project basis. Tell us what you're dreaming up and we'll scope the whole project with you, start to finish.
How it works
A system built around how you travel
1 · Power assessment
We look at what you run — AC, fridge, outlets, devices — and how long you want to run it off-grid.
2 · Design & install
Proper wire sizing, fusing, busbars and monitoring — labeled, documented and serviceable on the road.
3 · Test & walkthrough
We test everything under load and show you how to run and monitor your system with confidence.
RV questions
Common RV electrical questions
Do you come to my RV?
Yes — we're a mobile service. We work where your rig is parked: at home, in an RV park or at a storage lot in San Diego County and Orange County.
Can you fix or upgrade my existing solar or Victron system?
Yes. We troubleshoot and repair existing systems, and can add panels, lithium batteries, a bigger inverter or monitoring to what you already have.
Do you work on conversions that are mid-build?
Yes. We can step in at any stage — rough-in wiring before walls go up, finishing an electrical system someone else started, or taking the whole build from bare shell.
Do you do mechanical or engine repairs?
No. Our RV work is electrical and power systems, plus custom build work (conversions, metal fab, RV design, roof raises) quoted project by project.
How is pricing handled?
Repairs are scoped after we understand the problem. Upgrades and custom builds are quoted project by project once we know your rig and how you travel.
What should I send when I ask for a quote?
Your rig's year and make, where it's parked, and what's going wrong or what you want to run off-grid. Photos of your current battery or inverter area help too.
Request an RV quote
Tell us about your RV, van or skoolie and what you want to run — we'll design a system that fits. Serving San Diego County and Orange County. Prefer to talk? Call or text 619-210-4471.
Home or business electrical instead? Use the main request form.